Magnetic Steel Plate For Mono 2 160X95MM Flexible Build Platform For Anycubic Photon Resin 3D Printer Accessories Replacement
Product Score
See total with duties & tax
Select location for accurate pricing, availability, and delivery estimates
Order today for delivery Sep 27 - Oct 1
Or by September 25 - 27 with expedited shipping
Cancel for any reason at any time until your order shipped. Once your order has shipped, you may return your order. For details, please review our Returns and Cancellations policies. Special order items may not be eligible for cancellation.
Most items can be returned within 15 days of receipt for a refund of the product cost less return shipping. Shipping, duties, and taxes are not refundable. For details, please review our Returns and Cancellations policies.
Product details
Clean your build plate with isopropyl alcohol and keep it DRY so that the magnet can work normally. Clean the flexible steel plate too with wet paper if necessary. If the room temp in your city is below 10, the print model will be hard to stick to the base, please heat the magnetic base a while before installing. 2. Check the best position to place the magnetic base to your build plate in case it will be shifted. Please tear off the 3M adhesive about 20mm at first and then install step by step completely.
You can press it back and forth to make sure there is no gap or bubble. 3. Wait 48-72 hours so that it can work better. 4. Place the flexible steel plate on the magnetic base and make sure the handle faces you. 5. You may need to adjust the z-limit switch after installation. (not all printers need to adjust) It should be around 2.5mm higher. That means the printing height will be reduced by about 2.5mm. You can print a spacer or nut to fill the difference. 6.
SKID | 0I3U4PK740CM5 |
Manufacturer | HzdaDeve steel plate for Mono 2 |
Model | 160X95 PEI |
Part number | build plate for Photon mono 2 |